Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Palm Bay?
Chimney liner and rebuild work in Palm Bay typically runs $1,450 to $2,400 for a stainless flexible liner on a single-flue fireplace, and $3,200 to $7,500 for a partial or full chimney rebuild above the roofline. A rebuild that includes a new crown, cap, and firebox restoration at the same time lands closer to the top of that range. Every price we give is an estimate until a technician inspects the flue; the written estimate after that inspection sets the final number, and the estimate itself is free.
If you’re comparing quotes for a chimney sweep Palm Bay and liner job, the ranges below are what we see in this market for 2026.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what the main line items run in Palm Bay. These are typical ranges, not a quote. The type of flue, the height of the chimney, and the condition of the tile all push the price up or down within each band.
| Line Item | Typical 2026 Range |
|---|---|
| Stainless flexible liner, single flue | $1,450 – $2,400 |
| Insulated liner (wrapped, better for gas and oil appliance flues) | $1,900 – $3,200 |
| Liner on a second flue, same chimney | $1,200 – $1,800 |
| Full rebuild, firebox only | $1,200 – $2,800 |
| Firebox and smoke chamber restoration (HeatShield ceramic resurfacing) | $1,600 – $3,000 |
| Rebuild above the roof, partial (top few courses and crown) | $2,400 – $4,500 |
| Full rebuild above the roofline | $4,200 – $7,500 |
| New concrete or metal crown | $400 – $800 |
| Cap and top-sealing damper (Gelco, Famco) | $280 – $650 |
| Chimney inspection and written report | $0 – $250 |
| Sweep before relining | $180 – $350 |
| Isolation for a masonry or tile flue during liner work (from about $2,000) | Quoted per chimney |
What pushes cost up: a flue that’s too wide or too crooked for a standard liner, a chimney that needs tile removed before relining, and a rebuild where the inner wythe has failed and the whole stack has to come down to the roofline. What keeps cost down: a straight, sound flue that just needs a flexible liner dropped in, and bundling the sweep, inspection, and liner work in one visit. Our technicians have up to 13 years of experience, so they can tell you on the spot whether the flue is a liner candidate or a rebuild candidate.
What Affects Chimney Liner & Rebuild Pricing in Palm Bay
Five things move the number most in Palm Bay. Local Palm Bay homeowners often ask about moisture first, because this part of Florida swings between humid summers and dry spring stretches, which is hard on mortar and clay tile over years.
- Flue condition. A spalling, cracked, or offset clay-tile flue needs more labor than a sound one. Cracks let heat and moisture escape and give smoke a path back into the house, so they can’t be ignored.
- Number of flues. One fireplace means one liner. A masonry chimney with two flues usually means two liners, and the second one is cheaper because the setup time is shared.
- Chimney height and access. A taller stack or a roofline the crews have to reach carefully adds time and equipment. The height above the roof also drives the length of the rebuild.
- Brick and mortar condition. Mortar joints that are worn and soft point to a rebuild; hard, sound brick with clean joints usually only needs a liner and crown repair.
- Materials brand. We work with DuraFlex for flexible liner systems, HeatShield for firebox and flue tile restoration, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, dampers, venting, and liner components. Those professional-grade parts cost a little more than generic components but hold up better in a humid climate.
- Permit and code requirements. Most cities require a permit for a chimney rebuild, so ask your city’s building department before work starts. The permit and inspection part of the job adds cost to a rebuild, not to a liner.
One point worth saying plainly: any work on a chimney above the roof or on a firebox interior is height and heat work. The safety caveat matters. A chimney crown that looks fine from the ground can hide cracked mortar, and a firebox with a gap between the brick and the liner can leak smoke into a living space. That’s why a real inspection with a camera and a written report comes before a liner or rebuild quote. We document what we find so you can see the difference between a repair and a rebuild.
What You Get With a Professional Liner and Rebuild
A chimney liner job done properly involves more than sliding a flexible tube down the flue. We sweep first so the flue interior is clean, inspect with a camera to confirm the flue is sound enough to hold a liner, and measure the flue area against the appliance it serves. Then we install a DuraFlex flexible liner with the correct connector and cap. On the firebox and smoke chamber side, HeatShield ceramic resurfacing seals cracks and smooths the transition so smoke flows out instead of drifting into the room.
A rebuild is a different level of work. When the mortar and brick above the roofline are failing, we take the stack down to sound material and rebuild it with matching brick, a new crown, and flashing tied into the roof. We also handle the interior side, including firebox repairs with HeatShield and venting work with Olympia Chimney, Famco, and Gelco parts, so the whole chimney system is addressed instead of just the visible parts.
The advantage of having a sweep, inspection, and repair team on one job is that the same people who find a problem are the ones who fix it. A sweep can escalate to a repair diagnosis at the same visit, which saves scheduling a second company and saves money on separate visits.
How to Save on Chimney Liner & Rebuild in Palm Bay
There isn’t a magic coupon for this work, but a few decisions keep the number down without cutting corners on safety.
- Get the inspection first. The inspection report tells you which repairs are actually needed. Sometimes a flue that looks bad from the ground is a simple liner job rather than a rebuild. That one step can mean the difference between $1,500 and $5,000.
- Bundle the visit. A sweep, inspection, and liner quote done together is cheaper than scheduling them apart.
- Fix small damage early. A cracked crown or loose flashing repaired soon is much cheaper than a rebuild later. Rebuild costs climb quickly once water gets into the brick.
- Repair the firebox before you replace the liner. If the firebox has gaps but the flue is sound, HeatShield resurfacing may let you keep the existing flue. Ask us whether resurfacing is an option.
- Ask for the written estimate. We don’t quote by phone for a liner or rebuild. The number you get in writing is the number that holds. Free estimates mean you can compare without paying for the visit.
Our technicians have up to 13 years of experience and work with the same brands pros use nationwide. That matters when you compare quotes; a low bid that uses anonymous generic liner parts often costs more over years of use. Call (855) 632-3563 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost in Palm Bay
How much does a chimney liner cost in Palm Bay?
A stainless flexible liner for a single flue in Palm Bay typically costs $1,450 to $2,400, and an insulated liner runs $1,900 to $3,200. The final price depends on flue length, flue condition, and whether the flue needs any prep work. Call (855) 632-3563 for an exact quote; estimates are free.
How much does a chimney rebuild cost in Palm Bay?
A partial rebuild above the roof typically costs $2,400 to $4,500, and a full rebuild above the roofline runs $4,200 to $7,500. A firebox-only rebuild is usually $1,200 to $2,800. A written estimate after inspection sets the final price. Call (855) 632-3563 for a free estimate.
Is it cheaper to reline or rebuild my chimney?
Relining is cheaper when the brick and mortar above the roof are sound and the problem is only the flue interior. A liner typically runs $1,450 to $2,400, while even a partial rebuild starts around $2,400. If the brick is failing, a liner alone won’t fix the issue, and a rebuild is the right call. Call (855) 632-3563 and we’ll inspect and tell you which one you need.
Can you do the liner and the rebuild on the same visit?
Yes, in most cases the liner and rebuild can be completed on the same visit once the work is scoped. The inspection confirms the liner size, the rebuild extent, and any permit needs. Call (855) 632-3563. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How much does an inspection cost before a liner or rebuild?
Chimney inspections run $0 to $250 depending on the level of inspection and whether a camera is used. That report tells you whether you need a liner, a rebuild, or a simpler repair. Call (855) 632-3563 for a free estimate on the inspection.
Do you install liners for gas fireplaces and wood appliances?
Yes. We size the liner to the appliance, whether it’s a wood-burning fireplace, an insert, or a gas appliance flue. Insulated liners are often the right choice for higher-efficiency appliances and run $1,900 to $3,200. Call (855) 632-3563 to discuss your setup.
Get Your Palm Bay Chimney Priced Right
A liner and a rebuild are two different jobs with two different budgets, and the only way to know which one your chimney needs is to look inside it. We sweep, we inspect, and we repair with the same brands pros use nationwide, so the estimate you get is based on what is actually there, not a guess from the driveway. Free estimates, upfront pricing, and a written report you can keep.
Call (855) 632-3563 for a free estimate. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm, and we don’t dispatch crews on Saturday. We’re closed that day.
Pricing reflects the Palm Bay market as of 2026. Chimney Sweep Palm Bay offers free estimates – call (855) 632-3563.
Written by the team at Chimney Sweep Palm Bay.
What Our Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jennifer Whitaker"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Travis Walsh"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Matt Reed