Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Melbourne
If your chimney is leaking, your crown is cracking, or your cap has rusted through, we handle the repair. Chimney Sweep Palm Bay provides chimney repair across Melbourne, and we know what the salt air near the coast does to the metal parts of a chimney. It’s not the same work as an inland home, and we treat it that way. We’d rather show you what’s failing than sell you a full rebuild. Call (855) 632-3563 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Melbourne Homeowners Call Chimney Sweep Palm Bay for Chimney Repair
We’ve built a strong local reputation in Melbourne by being honest about what a chimney actually needs. Our technicians have up to 13 years of experience, and that shows when a beachside flashing job turns out to be a crown problem too. Customers in Indialantic, Indian Harbour Beach, and the older downtown blocks tell us the same thing: they want a straight answer and a written price before anyone touches the roof.
Response time to Melbourne is quick, and we work across the beachside and inland neighborhoods alike. We also bring the professional-grade materials to the job: DuraFlex flexible liners, HeatShield for firebox and flue tile restoration, and stainless caps and components from brands we trust. Sweep, inspect, and repair happen with the same team, so findings get fixed without a second company. Everything is documented, and nothing is recommended without camera evidence you can see for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Melbourne
Chimney Flashing Repair in Melbourne often comes down to salt corrosion, not roof wear. The flashing is the metal seal where your chimney meets the roof, and near the barrier island it takes a beating from salt air and storm-driven rain. When it fails, water runs down the chimney sides and into the attic or ceiling. We reseal or replace the flashing and make sure it’s properly sloped to shed water away from the chimney. A typical flashing repair in Melbourne runs $350 – $750, with the written estimate setting the final price.
Stainless over galvanised
We usually recommend a stainless steel flashing replacement rather than another galvanised set. Stainless holds up to salt air far better, and the extra upfront cost saves you from replacing the same pieces again soon. Salt corrosion eats galvanised flashing.
Leak tracing before the repair
We check the attic side and the roof deck before we commit to a flashing fix. Sometimes the leak is the flashing. Sometimes it’s a cracked crown or an open flue above it. Finding the real source first keeps you from paying for the wrong repair.
Chimney Crown Repair in Melbourne
Chimney Crown Repair in Melbourne is the repair we do most often on storm-damaged chimneys. The crown is the concrete cap on top of the chimney, sloped to shed water. High humidity, blasting rain, and shingle grit kicked up in hurricane season crack it over time, and once water seeps in, the freeze-proof warmth of our climate doesn’t save it: the masonry keeps soaking and spalling. We rebuild or resurface the crown with a salt-resistant mix and proper slope. A typical crown repair in Melbourne runs $400 – $900, and a full crown rebuild runs $900 – $1,500. The written estimate sets the final price.
Repair or rebuild
Hairline cracks and a worn surface usually mean a repair, and a resurfacing with a ceramic-grade mix can bring it back. Larger breaks, separated sections, or a crown that’s pulling away from the flue mean a rebuild. We show you the photos and explain which one you’re looking at.
What storm debris does to a crown
After a tropical storm, palm fronds, sand, and shingle grit collect on the crown and around the flue opening. That debris holds moisture against the concrete and speeds up spalling. Clearing it after the season is one of the simplest things a Melbourne homeowner can do to add time to a crown.
Trusted Brands We Service in Melbourne
We work with professional-grade brands on every repair, not anonymous parts from a bin. DuraFlex flexible liner systems handle full relining when the flue tiles are shot. HeatShield restores cracked fireboxes and flue tiles with a specialist ceramic resurfacing that most generalists don’t carry. Olympia Chimney covers caps and venting, and Gelco rounds out dampers and the smaller components that make a chimney work as a whole system. We source these as each job requires, so what you get is the same grade of material certified chimney contractors use nationwide. No generic substitutions, and no waiting around for a part that doesn’t fit.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Melbourne Homes
- Salt corrosion on caps and flashing. Beachside bungalows on the barrier island see galvanised caps and flashing rust through in a few years. Inland homes often get twice as long out of the same components.
- Storm debris clogging the flue. Hurricane-season sand, shingle grit, and palm fronds pack into flues and hold moisture against the crown. That moisture is what drives the spalling we repair afterward.
- Crumbling crowns on 1950s – 60s ranches. Older Melbourne homes near downtown have crowns that were never built with coastal weather in mind. High humidity and heavy rain find every crack.
- Glazed creosote from sporadic use. Mild winters mean fireplaces sit idle for months, then get used hard on a cold snap. First-degree creosote can build into third-degree glaze, which needs professional removal before it’s safe to burn again.
Pricing for Chimney Repair in Melbourne, FL
We give honest ranges so you know roughly where you stand before we arrive. Chimney flashing repair in Melbourne typically runs $350 – $750. Chimney crown repair runs $400 – $900, and a full rebuild runs $900 – $1,500. Mortar repointing and tuckpointing usually land between $300 and $800 depending on how much joint work is needed. Spalling brick repair and chimney waterproofing each run in the $400 – $1,000 range. A full chimney rebuilding job is a bigger project and runs $3,000 – $8,000. What moves the price is how much of the chimney the salt and storm damage has reached, and whether the flue needs relining too. The written estimate sets the final price, and estimates are free. Call (855) 632-3563 for yours.
We Also Serve Cities Near Melbourne
The same work carries over to the towns around us. We serve West Melbourne, June Park, Indialantic, and Indian Harbour Beach. If you’re a little further out from Melbourne, give us a call and we’ll tell you where you fit. The salt air problem doesn’t stop at the city line, and neither do we. Our chimney repair team covers the whole area.
Serving Melbourne, FL – Our Local Coverage Area
We serve Melbourne and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Melbourne
Once a year is the right interval here. Salt air and hurricane season together do more to a coastal chimney in one year than a decade of inland weather, so annual inspections catch corrosion and debris before they turn into structural repairs. Call (855) 632-3563 for an inspection.
A stainless steel cap is the right pick for a beachside home. Galvanised caps rust through within a few years in salt air, while stainless holds up far longer. We fit caps from brands like Olympia Chimney and Gelco. Call (855) 632-3563 for a quote.
It depends on how far the cracking goes, and we can usually tell you once we’ve seen it. Surface cracks and spalling often take a resurfacing with a salt-resistant mix. Separated sections or a crown pulling off the flue mean a rebuild. Call (855) 632-3563 and we’ll show you the photos.
Look for rust streaks on the flashing, water stains on the ceiling or chimney sides inside, and lifting or curled metal at the roof seam. Rust-through from salt air is the usual cause on a coastal Melbourne home. If you spot any of that, call (855) 632-3563 for an inspection.
Third-degree creosote is a hard, glazed, tarry coating that doesn’t brush off, and it’s dangerous because it ignites easily. First-degree creosote from sporadic winter use can progress to it if you skip sweeps. It needs professional removal, so call (855) 632-3563.
For chimney repair in Melbourne, call (855) 632-3563 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect, show you what we find, and give you a written price before any work starts.
Written by the team at Chimney Sweep Palm Bay.