Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Palm Bay?
Chimney repair in Palm Bay typically costs $285 to $1,850, with most single-component fixes landing between $400 and $900. A crown rebuild or a small masonry patch usually runs $350 to $750, while a full stainless-steel liner replacement climbs into the $2,400 to $5,800 range. Every job we quote is priced per job by a written estimate, and the estimate itself is free.
What pushes a Palm Bay repair toward the top of that range is rarely the flue itself. It’s what we find once we’re on the roof: cracked mortar joints, a crown that’s separated from the flue, or a firebox that needs resurfacing. We document what we find with photos before we quote, so the number you get is tied to something you can see. Chimney Sweep Palm Bay handles the sweep, the inspection and the repair, so a cleaning that turns up a problem doesn’t turn into a second appointment with a second company.
Key Takeaways
- Typical Palm Bay chimney repair: $285 to $1,850, depending on the component.
- Masonry crown rebuilds and small tuckpointing jobs: roughly $350 to $750.
- Full liner replacement with a flexible stainless system: $2,400 to $5,800.
- Firebox and flue tile resurfacing with HeatShield: $600 to $1,400.
- Free estimates, upfront pricing, and we answer 24/7 at (855) 632-3563.
Chimney Repair Cost Breakdown (2026)
Here’s what the individual pieces of a chimney repair run in the Palm Bay market. These are typical estimates, not exact quotes. The written estimate you receive after an inspection sets the final price.
| Repair type | Typical cost range | What it covers |
|---|---|---|
| Crown repair or rebuild | $350 – $900 | Patching hairline cracks up to a full crown replacement with proper slope and overhang |
| Masonry tuckpointing (spot) | $350 – $750 | Grinding out and repacking deteriorated mortar joints on a section of the stack |
| Masonry rebuild (upper stack) | $1,200 – $3,500 | Rebuilding the top courses of brick above the roofline, including new flashing tie-in |
| Flue tile crack repair (HeatShield) | $600 – $1,400 | Ceramic resurfacing of cracked or spalled flue tiles to restore a smooth, sealed flue |
| Firebox resurfacing (HeatShield) | $650 – $1,500 | Rebuilding the firebox walls and floor with a refractory mortar system |
| Full liner replacement (DuraFlex) | $2,400 – $5,800 | Flexible stainless liner sized to the appliance, with top plate and cap |
| Chimney cap replacement | $185 – $475 | Famco or Gelco cap sized to the flue, with mesh screening |
| Damper replacement | $250 – $650 | Top-sealing or throat damper replacement, including hardware |
| Flashing repair | $285 – $650 | Resealing or replacing step and counter flashing where the chimney meets the roof |
| Waterproofing (masonry sealant) | $275 – $600 | Breathable sealer applied to the exposed stack to slow water absorption |
What drives cost up or down is mostly access and scope. A cap swap takes an hour. A liner replacement takes a full day and depends on whether the existing flue is straight and properly sized. Repairs to the upper stack cost more than the same square footage lower down because of the scaffolding and roof work involved. And a repair that fixes the symptom but leaves the cause (usually water getting in at the crown or flashing) will cost you again next season.
We work with the professional-grade brands certified chimney contractors use nationwide, including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. That matters for pricing because it removes guesswork from component selection: a DuraFlex liner is sized to your appliance, a HeatShield application is matched to the flue condition we found, and a Famco cap is fitted to your actual flue dimensions rather than being trimmed to fit.
What Affects Chimney Repair Pricing in Palm Bay
Two houses on the same street can get quotes $600 apart. Here’s what actually moves the number.
- Roof pitch and access. Palm Bay has a lot of single-story ranch construction and some steeper two-story roofs. A steep pitch or a chimney crowded by nearby tree canopy means more setup time, ladder staging and fall protection, and that time shows up in the estimate.
- How much of the flue you’re repairing. Patching one cracked tile is a different job from relining the whole flue. HeatShield resurfacing handles the first case at a fraction of the cost of the second. We’ll tell you honestly which one your chimney needs.
- Whether water has been getting in. In a warm, humid climate like Palm Bay’s, a failed crown or flashing lets water into the masonry, and masonry that stays damp through the wet season deteriorates faster. Catching a crown crack early runs a few hundred dollars. Rebuilding the upper stack after several seasons of water intrusion runs into the thousands.
- Appliance type. A wood-burning fireplace, a gas insert and a wood stove each need different liner sizing, materials and venting components. Gelco and Olympia Chimney components cover the venting side; getting the sizing right the first time avoids a return visit.
- Firebox condition. A firebox with deteriorating refractory mortar needs resurfacing before it can be used safely. HeatShield is a specialist-grade ceramic system, and it’s priced differently than a generic mortar patch because it’s a different product.
- What the inspection turns up. A sweep that reveals a crack, a loose tile or a disconnected liner changes the scope. We inspect before we quote so the estimate reflects what’s actually there, not a worst-case assumption.
How to Save on Chimney Repair
There’s no coupon that makes masonry cheaper. What saves money is catching a small problem before it becomes a structural one, and getting the scope right the first time.
- Get the inspection done before the small crack becomes a rebuild. A crown crack repaired now runs a few hundred dollars. The same crack left through a couple of wet seasons can mean rebuilding courses of brick. Inspections cost far less than the repairs they prevent.
- Fix water intrusion at the source. If the crown or flashing is compromised, sealing the masonry without fixing the crown is money spent twice.
- Bundle the sweep and the repair. Because we handle chimney sweep, inspection and repair under the same roof, a cleaning that turns up a loose damper or a worn cap doesn’t require a second contractor and a second trip. The single-point accountability keeps the overall bill down.
- Do the cap and waterproofing while the chimney is already open. Adding a Famco or Gelco cap during a repair visit is cheaper than a separate call later.
- Ask for the estimate in writing. Ours is free. Call (855) 632-3563 and we’ll talk through what you’re seeing, then schedule the inspection that produces the written number.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Palm Bay?
Most chimney repairs in Palm Bay run $285 to $1,850, and the median single-component fix sits around $400 to $900. Crown work, tuckpointing and cap replacement sit at the lower end; liner and firebox work sit higher. The written estimate after inspection sets the final price, and estimates are free. Call (855) 632-3563 for yours.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper when the flue tiles are still structurally sound. HeatShield resurfacing runs $600 to $1,400 and restores cracked or spalled tiles; a full DuraFlex liner replacement runs $2,400 to $5,800. The deciding factor is whether the existing flue can be restored or has to be lined. We’ll inspect and tell you which applies. Call (855) 632-3563 to get that answer in writing.
Can you come today?
Same-day service is often possible. We answer the phone 24/7, and we dispatch fast from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 632-3563 and we’ll tell you the soonest slot.
How much does a chimney crown repair cost in Palm Bay?
A chimney crown repair in Palm Bay typically runs $350 to $900, with small crack patching at the low end and a full crown pour and rebuild at the high end. A crown that’s separated from the flue or has lost its slope needs the full rebuild. That’s also the repair most likely to prevent a much larger masonry bill later. Call (855) 632-3563 for a free estimate on your crown.
Do I need a chimney inspection before a repair?
Yes. An inspection is what tells us whether the problem is the crown, the flashing, the flue tiles or the firebox, and the written estimate follows from it. Skipping the inspection risks paying for the wrong repair. We handle the sweep, the inspection and the chimney repair in one visit so there’s no gap between finding a problem and fixing it. Call (855) 632-3563 to schedule.
Why Palm Bay Homeowners Call Us
We sweep, inspect and repair chimneys, and our technicians have up to 13 years of experience. We document what we find, we work with professional-grade materials, and we don’t send you to a second company when the inspection turns up a repair. If you’re a new homeowner, if it’s been more than a year since your last inspection, or if you’ve noticed smoke spillage, odor or visible deterioration on the stack, that’s the moment to get a written number rather than a guess. Your fireplace should work safely every time you light it.
Call (855) 632-3563 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Palm Bay.
Pricing reflects the Palm Bay market as of 2026. Chimney Sweep Palm Bay offers free estimates – call (855) 632-3563.
What Our Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jennifer Whitaker"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Travis Walsh"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Matt Reed